Bathroom Vanities
These are some of the vanities I have built. All are made of red oak with different colored oil stains, two coats of polyurithane and waxed.
View ArticleGarden Fence and Arbors
The wife’s picket fence is finally completed and just waiting for the morning glories and moon flowers to find their way up the arbors. The lot slopes so much that the front pickets are 39 inches and...
View ArticleEntertainment Center
I finally got my step daughters entertainment center done. The top, bottom, partitions and shelves are 3/4” birch plywood. The back is 1/4” birch plywood. The drawers are 1/2” plywood. The trim, shelf...
View ArticleMiter Saw Counter
I finally got my miter saw counter done the other day. The frame work is made of 2 X 4’s and a 2 X 6 on the back of the frames. I used my Kreg screw jig and glued the frames together. It might have...
View ArticleCatch Table, Assembly Table, Storage Unit
This unit is 48 inches wide by 6 foot, 6 inches long by 34 ½ inches high. The base section is made of 3/4 fir plywood with all the edges banded in white oak and ends are laminated. The top is made up...
View ArticleBetter Use Of Storage Area
When I started planning my shop, I decided to put a storage area next to my cyclone because it was kind of a dead space. My thought was to use it for wood storage but decided to keep all my off fall in...
View ArticleL-Shaped Computer Desk & Wall Unit
This is an L-Shaped computer desk & wall unit I just completed. The box constructions, drawer and door panels are made of 3/4” birch plywood. The top trim, side trim, base trim, drawer cover trim...
View ArticleThe Key To The Dresser Hidden Compartment - How It Works
I am in the process of finishing a crib and dresser for my first granddaughter, Haidyn Reese, who was born on June 30th. I decided I wanted to put a hidden compartment in the dresser somewhere that she...
View Article4 In 1 Crib
This is the 4 in 1 crib I built for my granddaughter Haidyn Reese, born on June 30. The crib can be converted to a toddler bed, day bed and full size bed. It is all made out of solid cherry. It is...
View Article6 Drawer Dresser With Hidden Compartment
This is a 6 drawer dresser I made for my granddaughter Haidyn Reese, born on June 30. There is a matching 4 in 1 crib that goes with it. The top, face frame, moldings, trim and drawer covers are made...
View ArticleMemorial Ash Box & Vault Box & Picture Frames
At the end of July, my 92 year old mother-in-law passed away. She wanted to be cremated and have a grave side service with just the family and close friends present. The family asked if I would make a...
View ArticleNecklace Jewelry Box
This is one of two jewelry boxes I am making for Christmas presents. My brother asked me to make this one for his daughter. She makes necklaces and wanted a jewelry box just devoted for them. This is...
View ArticleWalnut Jewelry Box
The last of the Christmas gifts. This jewelry box is for my step daughter. The outside is very similar to the oak one I posted last week but not as deep, this one is 12”w X 8”d X 16”h. This box has...
View ArticleTruck Floor Console With Hidden Compartment
I recently bought a 1990 F-150 pickup. I discovered that it had no cup holders, and decided to build a floor console for it. My wife is always looking for kleenex, so thought that was needed along with...
View ArticleCorner European Deer Mount
I just finished up a corner European deer mount from last year. The Iowa plaque is made out of walnut and the corner board is made out of quarter sawn white oak. The oak is stained with Minwax English...
View ArticleSolid Oak Dinning Table w/ Heart Woods Inserts
This is a dining table I made for a friend of mine at my church. He has done a lot of missionary work in Honduras over the years. On these trips he brought back purple heart, red heart and green heart...
View ArticleDoll Chairs
I made four of these chairs for Christmas presents. I had never made doll furniture before and really enjoyed doing them. Each chair had 19 pieces and was surprised that they took longer than I...
View Article30 Gun Cabinet
This is a cabinet I’ve been working on for the last couple of months. It is a 30-gun gun cabinet made of quarter sawn white oak. It is in 2 sections, an upper unit and a base unit, measuring 9 foot...
View ArticleFireplace Surround W/Bookcases
I did this unit right before I left for Florida and never got it loaded on lumberjocks. The living room had a cathedral ceiling with a marble fireplace right in the middle of a big wall. This is what I...
View ArticleHumidor & Keepsake Box
The humidor was made for my son-in-law in California. It is solid cherry and stained with Zar rosewood. I gave it 3 coats of rub on poly and 2 coats of wax applied by #0000 steel wool. The inside is...
View Article
More Pages to Explore .....